3-slot frame switch
- Commodity name： 3-slot frame switch
Add WeChat
- Product Features
- Product Parameters
- Order Information
-
NTW-SW9300CoreThe switch is a high-capacity 10G core switch launched by Nanjing Tianwei Vision for core networks. To meet the market's demand for high performance, it adopts a green energy-saving design concept in hardware, utilizing high-frequency, high-density, and highly stable multilayer circuit board designs, and selects first-class international high-frequency low-resistance components, significantly reducing the device's power consumption while improving network operation efficiency and effectively reducing users' operating costs. In terms of software, it is equipped with a multilayer switch operating system that supports the vast majority of enterprise network layer 2 and layer 3 data exchange services.
As a launched chassis switch product, this switch can be widely applied to the core layer of campus networks in various industries, providing users with multi-service network solutions.
-
Project
NTW-SW9300
Interface
Expansion Slot
3 Expansion Board Slots
Switching Capacity
15.6Tbps
Packet Forwarding Rate
2280Mpps
Physical Specifications
Relative Humidity
10%～90% Non-condensing
Operating Temperature
0～50°C
Power Characteristics
AC: 100-240VAC, 50/60 Hz
Power Redundancy
1+1 Backup, Hot-swappable
Physical Dimensions
483mm×455mm×260mm
Power Consumption
180W
Standard
6U
Service Characteristics:
Project
NTW-SW9300
Supported Protocol Standards
IEEE 802.3, 10BASE-T Ethernet
IEEE 802.3u, Fast Ethernet Standard
IEEE 802.3ab, Gigabit Ethernet Standard
IEEE 802.3z, Gigabit Ethernet Fiber Standard
IEEE 802.3ae, 10G Ethernet Standard
MAC Address
128K MAC Address Table
Automatic Update, Bidirectional Learning
MAC Address Aging Time Setting
Port Buffer
128Mb
Jumbo Frame
9216bytes
VLAN Configuration
Up to 4096 VLANs
Port-based VLAN
802.1Q Standard VLAN
Spanning Tree
STP Spanning Tree Protocol
RSTP Rapid Spanning Tree Protocol
MSTP Multiple Spanning Tree Protocol
Port Aggregation
Static Aggregation, Dynamic Aggregation
Port Mirroring
Many-to-One Port Mirroring, No Limit on Number of Mirrored Source Ports
Supports 4 Groups of Mirroring
Port Flow Control
Half-Duplex Backpressure Control;
Full-Duplex Based on PAUSE Frame;
Port Rate Limiting
Port-based Input/Output Bandwidth Management
IP Routing
Static Routing
OSPF, RIP, BGP
Redundancy Backup
VRRP
IPv6
Static Routing, RIPng, OSPFv3
Supports IPv6 and IPv4 Dual Stack
Supports Pingv6, Telnetv6
Multicast Control
IGMP Snooping;
DHCP
DHCP Server
DHCP Snooping
DHCP Relay
Storm Suppression
Suppression of Broadcast, Multicast, Unicast, etc.
Security Features
Hardware IP ACL, MAC ACL, VLAN ACL, Supports Layer 3 and Layer 4 ACL Functions
Hardware-based Port IP+MAC Binding
User Hierarchical Management and Password Protection
QOS
802.1p Port Queue Priority Algorithm
Cos/Tos, QOS Marking
WRR (Weighted Round Robin), Weighted Priority Round Robin Algorithm
Cable Wiring Sequence
Auto-MDIX Function, Automatically Identifies Straight and Crossed Cables
Negotiation Mode
Port Auto-Negotiation Function (Auto-Negotiation of Transmission Rate and Duplex Mode)
System Maintenance
Configuration File Upload/Download
Upgrade Package Upload
WEB Restore Factory Configuration
System Log Function
Supports Ping
Network Management
WEB Interface Management (Supports HTTP and HTTPS Protocols)
CLI Interface Management
Telnet Remote Management
SSH 2.0
Supports SNMP Network Management
Supports NTP Client
-
Host Name
Device Information
NTW-SW9300
Host - 3 expansion slots, 2 power slots (power supply sold separately)
Power Module
Module Information
PWR-AC-180
220V AC power module, input voltage AC 100-240V, maximum power 180W, supports hot swapping;
Service Board
Module Information
NTW-SW9300-G24
Service Board - 24 10/100/1000M Ethernet ports + 8 Gigabit SFP multiplexed optical ports
NTW-SW9300-G24S
Service Board - 24 Gigabit SFP optical ports + 8 10/100/1000M multiplexed Ethernet ports
NTW-SW9300-G48
Service Board - 48 10/100/1000M Ethernet ports
NTW-SW9300-G48S
Service Board - 48 Gigabit SFP optical ports
NTW-SW9300-X12S
Service Board - 12 10G SFP+ optical ports + 8 10/100/1000M Ethernet ports
Key words:
Leave Us A Message
Note: Please leave your contact information and our professionals will contact you as soon as possible!
More Products
The NTW-SW9600 core switch is a high-capacity 10G core switch launched by Nantianshi for core networks. To meet the market's demand for high performance, it adopts a green energy-saving design concept in hardware, utilizing high-frequency, high-density, and highly stable multilayer circuit board designs, and selecting top international high-frequency low-resistance components, which greatly reduces the device's power consumption. This not only improves network operation efficiency but also effectively reduces users' operating costs. In terms of software, it is equipped with a multilayer switch operating system that supports the vast majority of enterprise network Layer 2 and Layer 3 data exchange services. As a rack-mounted switch product, this switch can be widely applied in the core layer of campus networks across various industries, providing users with multi-service network solutions.
The NTW-G19000 is the company's latest modular design box platform for GPON/XGSPON or EPON/10G EPON. The device combines excellent industrial design with advanced manufacturing technology, providing users with a broadband access product that is moderately dense, highly reliable, flexible in networking, and easy to install and maintain. This product features line-speed forwarding capabilities for IPv4/IPv6 services, carrier-grade security features, and service performance, offering high reliability, high scalability, and strong service capabilities to provide large capacity, high-speed, and high-bandwidth data, voice, and video service access for carrier-grade broadband access networks. Depending on different user scenarios, this product can meet the application needs for various access situations such as FTTB, FTTC, and FTTH.
The NTW-AC1000 is a high-performance smart Wi-Fi authentication gateway with a 10G capability, featuring a three-in-one function of AC, gateway, and authentication. It enables unified configuration and management of wireless APs, meeting the export gateway needs of enterprises. The NTW-AC1000 supports various authentication access methods, including WeChat authentication, making it an ideal device for optimal layout of wireless network solutions in chain hotels, enterprises, schools, shopping malls, and restaurants. The configuration is very simple. Additionally, the NTW-AC1000 supports intelligent flow control, which intelligently selects priority based on application type, easily resolving issues of various P2P programs occupying network bandwidth. This product is characterized by high performance, high reliability, easy installation, and easy maintenance, significantly saving labor and material costs in network layout.
Copyright © 2025 Shenzhen Nantian Weishi Technology Co., Ltd. All Rights Reserved SEO Business License Powered by：CEglobal
SAF Coolest v1.3.1.2 设置面板 GAGSE-ZGYF-JAAEE-ZWE
https://dc.thefastmake.com/index.html?configure=--enable-dom-interceptor