All-Gigabit 8+2 Optical Port Switch
PoE technology (Power over Ethernet) refers to Ethernet power supply technology, which means that while transmitting data signals for some IP-based terminals (such as IP phones, wireless access points, network cameras, etc.), it also provides DC power supply technology for these devices. The devices that receive DC power are called powered devices.
With simple and convenient installation and maintenance methods and rich service features, it helps users build a safe and reliable high-performance network. It is mainly positioned at the core or aggregation layer of user networks in industrial parks, buildings, factories, government agencies, and residential broadband; it can be widely used in Ethernet access scenarios for small and medium-sized enterprises, internet cafes, hotels, schools, etc.
- Commodity name： All-Gigabit 8+2 Optical Port Switch
Add WeChat
- Product Features
- Product Parameters
- Order Information
-
lSupports 8 Gigabit POE ports + 2 Gigabit optical ports
lComplies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z standards
lFlow control method: Full duplex uses IEEE 802.3x standard, half duplex uses Back pressure standard
lSupports automatic port flipping (Auto MDI/MDIX)
lUses a store-and-forward switching mechanism
lAll ports support line-speed switching
lZero configuration feature, automatically supplies to adaptive devices
lPanel indicator lights monitor working status and assist in fault analysis
-
General Performance Indicators
Product Name
10-Port Full Gigabit POE Switch
Product Model
ZX901-AFG-82NS
Port Definition
8 Gigabit POE Ports + 2 Gigabit Optical Ports
Network Protocol
IEEE802.3
IEEE802.3u
IEEE802.3x
IEEE802.3ab
IEEE802.3z
POE Parameters
PoE Standard: Complies with IEEE802.3af / IEEE802.3at
Maximum per port: 15.4 W (IEEE 802.3af)
Maximum per port: 30 W (IEEE 802.3at)
PoE Compatibility: IEEE 802.3af/at Adaptive
POE Output Voltage: DC 52V
POE Power Line Core: 1/2+ ; 3/6-
Network Transmission Medium
10BASE-T: Cat3, 4, 5 UTP (≤100 meters)
100BASE-TX: Cat5 and above UTP (≤100 meters)
1000BASE-TX: Cat5 and above UTP (≤100 meters)
DIP Switch Definition
Extend OFF: Shared mode, all interfaces can communicate with each other, transmission distance within 100 meters, transmission rate 10M/100M/1000M adaptive;
Extend ON: Ports 7-8 support 250 meters power supply and data transmission, transmission rate changes to 10M, other ports remain unchanged;
Fiber Optic Indicators
Multimode Fiber: 850nm, 1310nm Transmission Distance: 550m/2Km
Single-mode Fiber: 1310nm, 1550nm Transmission Distance: 20/40/60/80/100/120Km
Power Supply
Voltage Input: AC 100-240V Power Configuration: 52V2.3A Total Power: 120W
LED Indicators
PWR
Always On: Device powered on
Off: Device not powered onMode
Flashing: Link extension mode
Off: Shared mode
1-10
Slow Flash: Link connection normal
Fast Flash: Data transmission normal
Off: Link not connected
Appearance Dimensions
Product Dimensions (L×W×H): 268mm*181mm*44mm
Packaging Dimensions (L×W×H): 312mm*262mm*84mm
Product Weight: 1.1kg
Packaging Weight: 1.7kg
Packaging Information
Outer Box Dimensions: 540*435*332mm
Packing Quantity: 10 units
Packing Weight: 18KG
Operating Environment
Operating Temperature: -20~50°C
Storage Temperature: -40~85°C
Operating Humidity: Maximum relative humidity 90%, no condensation
Storage Humidity: Maximum relative humidity 95%, no condensation
Operating Altitude: Maximum 10,000 feet (3,000 meters)
Storage Altitude: Maximum 10,000 feet (3,000 meters)
Certification
CE, FCC, CCC, RoHS
Mean Time Between Failures
100,000 hours
Packaging List
- Switch: 1 unit
- Manual: 1 PCS
- Certificate of Conformity, Warranty Card: 1 PCS
- Power Cable: 1 piece
- 1U Mounting Ears: 1 pair
Hardware Parameters
Chip Solution
RTL8367S*2
Backplane Bandwidth
20Gbps
Packet Forwarding Rate
14.88Mpps
Packet Buffer
2M
MAC Address Table
2K
Forwarding Mode
Store and Forward
-
Model
Description
ZX901-AFG-82NS
8 Gigabit POE ports + 2 Gigabit SFP optical interfaces; af/at
Key words:
Leave Us A Message
Note: Please leave your contact information and our professionals will contact you as soon as possible!
More Products
The NTW-SW9600 core switch is a high-capacity 10G core switch launched by Nantianshi for core networks. To meet the market's demand for high performance, it adopts a green energy-saving design concept in hardware, utilizing high-frequency, high-density, and highly stable multilayer circuit board designs, and selecting top international high-frequency low-resistance components, which greatly reduces the device's power consumption. This not only improves network operation efficiency but also effectively reduces users' operating costs. In terms of software, it is equipped with a multilayer switch operating system that supports the vast majority of enterprise network Layer 2 and Layer 3 data exchange services. As a rack-mounted switch product, this switch can be widely applied in the core layer of campus networks across various industries, providing users with multi-service network solutions.
The NTW-G19000 is the company's latest modular design box platform for GPON/XGSPON or EPON/10G EPON. The device combines excellent industrial design with advanced manufacturing technology, providing users with a broadband access product that is moderately dense, highly reliable, flexible in networking, and easy to install and maintain. This product features line-speed forwarding capabilities for IPv4/IPv6 services, carrier-grade security features, and service performance, offering high reliability, high scalability, and strong service capabilities to provide large capacity, high-speed, and high-bandwidth data, voice, and video service access for carrier-grade broadband access networks. Depending on different user scenarios, this product can meet the application needs for various access situations such as FTTB, FTTC, and FTTH.
The NTW-AC1000 is a high-performance smart Wi-Fi authentication gateway with a 10G capability, featuring a three-in-one function of AC, gateway, and authentication. It enables unified configuration and management of wireless APs, meeting the export gateway needs of enterprises. The NTW-AC1000 supports various authentication access methods, including WeChat authentication, making it an ideal device for optimal layout of wireless network solutions in chain hotels, enterprises, schools, shopping malls, and restaurants. The configuration is very simple. Additionally, the NTW-AC1000 supports intelligent flow control, which intelligently selects priority based on application type, easily resolving issues of various P2P programs occupying network bandwidth. This product is characterized by high performance, high reliability, easy installation, and easy maintenance, significantly saving labor and material costs in network layout.
Copyright © 2025 Shenzhen Nantian Weishi Technology Co., Ltd. All Rights Reserved SEO Business License Powered by：CEglobal
SAF Coolest v1.3.1.2 设置面板 GAGSE-ZGYF-JAAEE-ZWE
https://dc.thefastmake.com/index.html?configure=--enable-dom-interceptor